Molar concentration

Molar concentration
Molar concentration
Common symbols	c, [chemical symbol or formula]
SI unit	mol/m3
Other units	mol/L
Derivations from; other quantities	c = n/V
Dimension

Molar concentration (also called molarity, amount concentration or substance concentration) is a measure of the concentration of a chemical species, in particular, of a solute in a solution, in terms of amount of substance per unit volume of solution. In chemistry, the most commonly used unit for molarity is the number of moles per liter, having the unit symbol mol/L or mol/dm³ in SI units. A solution with a concentration of 1 mol/L is said to be 1 molar, commonly designated as 1 M or 1 M. Molarity is often depicted with square brackets around the substance of interest; for example, the molarity of the hydrogen ion is depicted as [H⁺].

Definition

Molar concentration or molarity is most commonly expressed in units of moles of solute per litre of solution.^[1] For use in broader applications, it is defined as amount of substance of solute per unit volume of solution, or per unit volume available to the species, represented by lowercase $c$ :^[2]

c={\frac {n}{V}}={\frac {N}{N_{\text{A}}\,V}}={\frac {C}{N_{\text{A}}}}.

Here, $n$ is the amount of the solute in moles,^[3] $N$ is the number of constituent particles present in volume $V$ (in litres) of the solution, and $N_{\text{A}}$ is the Avogadro constant, since 2019 defined as exactly 6.02214076×10²³ mol⁻¹. The ratio ${\frac {N}{V}}$ is the number density $C$ .

In thermodynamics the use of molar concentration is often not convenient because the volume of most solutions slightly depends on temperature due to thermal expansion. This problem is usually resolved by introducing temperature correction factors, or by using a temperature-independent measure of concentration such as molality.^[3]

The reciprocal quantity represents the dilution (volume) which can appear in Ostwald's law of dilution.

Formality or analytical concentration

If a molecular entity dissociates in solution, the concentration refers to the original chemical formula in solution, the molar concentration is sometimes called formal concentration or formality (F_A) or analytical concentration (c_A). For example, if a sodium carbonate solution (Na₂CO₃) has a formal concentration of c(Na₂CO₃) = 1 mol/L, the molar concentrations are c(Na⁺) = 2 mol/L and c(CO2−3) = 1 mol/L because the salt dissociates into these ions.^[4]

Units

In the International System of Units (SI), the coherent unit for molar concentration is mol/m³. However, most chemical literature traditionally uses mol/dm³, which is the same as mol/L. This traditional unit is often called a molar and denoted by the letter M, for example:

1 mol/m³ = 10⁻³ mol/dm³ = 10⁻³ mol/L = 10⁻³ M = 1 mM = 1 mmol/L.

The SI prefix "mega" (symbol M) has the same symbol. However, the prefix is never used alone, so "M" unambiguously denotes molar. Sub-multiples, such as "millimolar" (mM) and "nanomolar" (nM), consist of the unit preceded by an SI prefix:

Name	Abbreviation	Concentration
Name	Abbreviation	(mol/L)	(mol/m³)
millimolar	mM	10⁻³	10⁰=1
micromolar	μM	10⁻⁶	10⁻³
nanomolar	nM	10⁻⁹	10⁻⁶
picomolar	pM	10⁻¹²	10⁻⁹
femtomolar	fM	10⁻¹⁵	10⁻¹²
attomolar	aM	10⁻¹⁸	10⁻¹⁵
zeptomolar	zM	10⁻²¹	10⁻¹⁸
yoctomolar	yM	10⁻²⁴ (6 particles per 10 L)	10⁻²¹
rontomolar	rM	10⁻²⁷	10⁻²⁴
quectomolar	qM	10⁻³⁰	10⁻²⁷

Related quantities

Number concentration

The conversion to number concentration $C_{i}$ is given by

C_{i}=c_{i}N_{\text{A}},

where $N_{\text{A}}$ is the Avogadro constant.

Mass concentration

The conversion to mass concentration $\rho _{i}$ is given by

\rho _{i}=c_{i}M_{i},

where $M_{i}$ is the molar mass of constituent $i$ .

Mole fraction

The conversion to mole fraction $x_{i}$ is given by

x_{i}=c_{i}{\frac {\overline {M}}{\rho }},

where ${\overline {M}}$ is the average molar mass of the solution, $\rho$ is the density of the solution.

A simpler relation can be obtained by considering the total molar concentration, namely, the sum of molar concentrations of all the components of the mixture:

x_{i}={\frac {c_{i}}{c}}={\frac {c_{i}}{\sum _{j}c_{j}}}.

Mass fraction

The conversion to mass fraction $w_{i}$ is given by

w_{i}=c_{i}{\frac {M_{i}}{\rho }}.

Molality

For binary mixtures, the conversion to molality $b_{2}$ is

b_{2}={\frac {c_{2}}{\rho -c_{1}M_{1}}},

where the solvent is substance 1, and the solute is substance 2.

For solutions with more than one solute, the conversion is

b_{i}={\frac {c_{i}}{\rho -\sum _{j\neq i}c_{j}M_{j}}}.

Properties

Sum of molar concentrations – normalizing relations

The sum of molar concentrations gives the total molar concentration, namely the density of the mixture divided by the molar mass of the mixture or by another name the reciprocal of the molar volume of the mixture. In an ionic solution, ionic strength is proportional to the sum of the molar concentration of salts.

Sum of products of molar concentrations and partial molar volumes

The sum of products between these quantities equals one:

\sum _{i}c_{i}{\overline {V_{i}}}=1.

Dependence on volume

The molar concentration depends on the variation of the volume of the solution due mainly to thermal expansion. On small intervals of temperature, the dependence is

c_{i}={\frac {c_{i,T_{0}}}{1+\alpha \Delta T}},

where $c_{i,T_{0}}$ is the molar concentration at a reference temperature, $\alpha$ is the thermal expansion coefficient of the mixture.

Examples

11.6 g of NaCl is dissolved in 100 g of water. The final mass concentration ρ(NaCl) is
ρ(NaCl) = ⁠11.6 g/11.6 g + 100 g⁠ = 0.104 g/g = 10.4 %.

The volume of such a solution is 104.3mL (volume is directly observable); its density is calculated to be 1.07 (111.6g/104.3mL)
The molar concentration of NaCl in the solution is therefore

c(NaCl) = ⁠11.6 g/58 g/mol⁠ / 104.3 mL = 0.00192 mol/mL = 1.92 mol/L.
Here, 58 g/mol is the molar mass of NaCl.
A typical task in chemistry is the preparation of 100 mL (= 0.1 L) of a 2 mol/L solution of NaCl in water. The mass of salt needed is
m(NaCl) = 2 mol/L × 0.1 L × 58 g/mol = 11.6 g.
To create the solution, 11.6 g NaCl is placed in a volumetric flask, dissolved in some water, then followed by the addition of more water until the total volume reaches 100 mL.
The density of water is approximately 1000 g/L and its molar mass is 18.02 g/mol (or 1/18.02 = 0.055 mol/g). Therefore, the molar concentration of water is
c(H₂O) = ⁠1000 g/L/18.02 g/mol⁠ ≈ 55.5 mol/L.
Likewise, the concentration of solid hydrogen (molar mass = 2.02 g/mol) is
c(H₂) = ⁠88 g/L/2.02 g/mol⁠ = 43.7 mol/L.
The concentration of pure osmium tetroxide (molar mass = 254.23 g/mol) is
c(OsO₄) = ⁠5.1 kg/L/254.23 g/mol⁠ = 20.1 mol/L.
A typical protein in bacteria, such as E. coli, may have about 60 copies, and the volume of a bacterium is about 10⁻¹⁵ L. Thus, the number concentration C is
C = 60 / (10⁻¹⁵ L) = 6×10¹⁶ L⁻¹.
The molar concentration is
c = ⁠C/N_A⁠ = ⁠6×10¹⁶ L⁻¹/6×10²³ mol⁻¹⁠ = 10⁻⁷ mol/L = 100 nmol/L.
Reference ranges for blood tests, sorted by molar concentration:

References

^ Tro, Nivaldo J. (6 January 2014). Introductory chemistry essentials (Fifth ed.). Boston. p. 457. ISBN 9780321919052. OCLC 857356651.{{cite book}}: CS1 maint: location missing publisher (link)
^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "amount concentration, c". doi:10.1351/goldbook.A00295
^ ^a ^b Kaufman, Myron (2002). Principles of thermodynamics. CRC Press. p. 213. ISBN 0-8247-0692-7.
^ Harvey, David (2020-06-15). "2.2: Concentration". Chemistry LibreTexts. Retrieved 2021-12-15.

External links

[1] Tro, Nivaldo J. (6 January 2014). Introductory chemistry essentials (Fifth ed.). Boston. p. 457. ISBN 9780321919052. OCLC 857356651.{{cite book}}: CS1 maint: location missing publisher (link)

[GoldBook-2] IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "amount concentration, c". doi:10.1351/goldbook.A00295

[kaufman-3] Kaufman, Myron (2002). Principles of thermodynamics. CRC Press. p. 213. ISBN 0-8247-0692-7.

[Harvey_2020-4] Harvey, David (2020-06-15). "2.2: Concentration". Chemistry LibreTexts. Retrieved 2021-12-15.

[1]

[2]

[3]

[4]

v t e Mole concepts
Constants	Avogadro constant Boltzmann constant Gas constant
Physical quantities	Mass concentration Molar concentration Molality Mass Volume Density Mole fraction Mass fraction Amount of substance Molar mass Atomic mass Particle number Pressure Thermodynamic temperature Molar volume Specific volume
Laws	Charles's law Boyle's law Gay-Lussac's law Combined gas law Avogadro's law Ideal gas law

v t e Chemical solutions
Solution	Ideal solution Aqueous solution Solid solution Buffer solution Flory–Huggins Mixture Suspension Colloid Phase diagram Phase separation Eutectic point Alloy Saturation Supersaturation Serial dilution Dilution (equation) Apparent molar property Miscibility gap
Concentration and related quantities	Molar concentration Mass concentration Number concentration Volume concentration Normality Molality Mole fraction Mass fraction Isotopic abundance Mixing ratio Ternary plot
Solubility	Solubility equilibrium Total dissolved solids Solvation Solvation shell Enthalpy of solution Lattice energy Raoult's law Henry's law Solubility table (data) Solubility chart Miscibility
Solvent	(Category) Acid dissociation constant Protic solvent Polar aprotic solvent Inorganic nonaqueous solvent Solvation List of boiling and freezing information of solvents Partition coefficient Polarity Hydrophobe Hydrophile Lipophilic Amphiphile Lyonium ion Lyate ion