Jump to content

Allotropes of phosphorus

From Wikipedia, the free encyclopedia
(Redirected from Violet phosphorus)
White phosphorus (left), red phosphorus (center left and center right), and violet phosphorus (right)
White phosphorus and resulting allotropes

Elemental phosphorus can exist in several allotropes, the most common of which are white and red solids. Solid violet and black allotropes are also known. Gaseous phosphorus exists as diphosphorus and atomic phosphorus.

White phosphorus

[edit]
This section is about the chemistry of white phosphorus. For military applications, see white phosphorus munitions.
White phosphorus

White phosphorus sample with a chunk removed from the corner to expose un-oxidized material

Tetraphosphorus molecule
Names
IUPAC names
White phosphorus
Tetraphosphorus
Systematic IUPAC name
1,2,3,4-Tetraphosphatricyclo[1.1.0.02,4]butane
Other names
  • Molecular phosphorus
  • Yellow phosphorus
Identifiers
3D model (JSmol)
ChemSpider
UN number 1381
  • InChI=1S/P4/c1-2-3(1)4(1)2
    Key: OBSZRRSYVTXPNB-UHFFFAOYSA-N
  • P12P3P1P23
Properties
P4
Molar mass 123.895 g·mol−1
Density 1.82 g/cm3
Melting point 44.1 °C; 111.4 °F; 317.3 K
Boiling point 280 °C; 536 °F; 553 K
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 4: Very short exposure could cause death or major residual injury. E.g. VX gasFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
4
4
2
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
White phosphorus crystal structure

White phosphorus, yellow phosphorus or simply tetraphosphorus (P4) exists as molecules of four phosphorus atoms in a tetrahedral structure, joined by six phosphorus—phosphorus single bonds. The tetrahedral arrangement results in ring strain and instability.[1] Although both are called "white phosphorus", in fact two different crystal allotropes are known, interchanging reversibly at 195.2 K.[2] The element's standard state is the body-centered cubic α form, which is actually metastable under standard conditions.[1] The β form is believed to have a hexagonal crystal structure.[2]

Molten and gaseous white phosphorus also retains the tetrahedral molecules, until 800 °C (1,500 °F; 1,100 K) when it starts decomposing to P
2 molecules.[3] The P
4 molecule in the gas phase has a P-P bond length of rg = 2.1994(3) Å as was determined by gas electron diffraction.[4] The β form of white phosphorus contains three slightly different P
4 molecules, i.e. 18 different P-P bond lengths — between 2.1768(5) and 2.1920(5) Å. The average P-P bond length is 2.183(5) Å.[3]

White phosphorus is a translucent waxy solid that quickly yellows in light, and impure white phosphorus is for this reason called yellow phosphorus. It glows greenish in the dark (when exposed to oxygen) and is highly flammable and pyrophoric (self-igniting) upon contact with air. It is toxic, causing severe liver damage on ingestion and phossy jaw from chronic ingestion or inhalation. The odour of combustion of this form has a characteristic garlic smell, and samples are commonly coated with white "diphosphorus pentoxide", which consists of P4O10 tetrahedral with oxygen inserted between the phosphorus atoms and at their vertices. White phosphorus is only slightly soluble in water and can be stored under water. Indeed, white phosphorus is safe from self-igniting when it is submerged in water; due to this, unreacted white phosphorus can prove hazardous to beachcombers who may collect washed-up samples while unaware of their true nature.[5][6] P4 is soluble in benzene, oils, carbon disulfide, and disulfur dichloride.

Production and applications

[edit]
See also: Match

The white allotrope can be produced using several methods. In the industrial process, phosphate rock is heated in an electric or fuel-fired furnace in the presence of carbon and silica.[7] Elemental phosphorus is then liberated as a vapour and can be collected under phosphoric acid. An idealized equation for this carbothermal reaction is shown for calcium phosphate (although phosphate rock contains substantial amounts of fluoroapatite):

2 Ca3(PO4)2 + 6 SiO2 + 10 C → 6 CaSiO3 + 10 CO + P4

White phosphorus has an appreciable vapour pressure at ordinary temperatures. The vapour density indicates that the vapour is composed of P4 molecules up to about 800 °C. Above that temperature, dissociation into P2 molecules occurs.

In base, white phosphorus spontaneously disproportionates to phosphine and various phosphorus oxyacids.[8]

It ignites spontaneously in air at about 50 °C (122 °F), and at much lower temperatures if finely divided (due to melting-point depression). Phosphorus reacts with oxygen, usually forming two oxides depending on the amount of available oxygen: P4O6 (phosphorus trioxide) when reacted with a limited supply of oxygen, and P4O10 when reacted with excess oxygen. On rare occasions, P4O7, P4O8, and P4O9 are also formed, but in small amounts. This combustion gives phosphorus(V) oxide:

P4 + 5 O2 → P4O10

Because of this property, white phosphorus is used as a weapon.

Phosphorus pentachloride is prepared by the reaction of white phosphorus with excess of dry chlorine.[9]

P4 + 10Cl2 → 4PCl5

It can also be prepared by the action of sulfuryl chloride on white phosphorus.[9]

P4 + 10SO2Cl2 → 4PCl5 + 10SO2

Other polyhedrane analogues

[edit]

Although white phosphorus forms the tetrahedron, the simplest possible Platonic hydrocarbon, no other polyhedral phosphorus clusters are known.[10] White phosphorus converts to the thermodynamically-stabler red allotrope, but that allotrope is not isolated polyhedra.

Cubane, in particular, is unlikely to form,[10] and the closest approach is the half-phosphorus compound P4(CH)4, produced from phosphaalkynes.[11] Other clusters are more thermodynamically favorable, and some have been partially formed as components of larger polyelemental compounds.[10]

Red phosphorus

[edit]
Red phosphorus
Red phosphorus structure

Red phosphorus may be formed by heating white phosphorus to 300 °C (570 °F) in the absence of air or by exposing white phosphorus to sunlight. Red phosphorus exists as an amorphous network. Upon further heating, the amorphous red phosphorus crystallizes. Bulk red phosphorus does not ignite in air at temperatures below 240 °C (460 °F), whereas pieces of white phosphorus ignite at about 30 °C (86 °F).

Under standard conditions it is more stable than white phosphorus, but less stable than the thermodynamically stable black phosphorus. The standard enthalpy of formation of red phosphorus is −17.6 kJ/mol.[1] Red phosphorus is kinetically most stable.

It was first presented by Anton von Schrötter before the Vienna Academy of Sciences on December 9, 1847, although others had doubtlessly had this substance in their hands before, such as Berzelius.[12]

Applications

[edit]
See also: Safety match

Red phosphorus can be used as a very effective flame retardant, especially in thermoplastics (e.g. polyamide) and thermosets (e.g. epoxy resins or polyurethanes). The flame retarding effect is based on the formation of polyphosphoric acid. Together with the organic polymer material, these acids create a char that prevents the propagation of the flames. The safety risks associated with phosphine generation and friction sensitivity of red phosphorus can be effectively minimized by stabilization and micro-encapsulation. For easier handling, red phosphorus is often used in form of dispersions or masterbatches in various carrier systems. However, for electronic/electrical systems, red phosphorus flame retardant has been effectively banned by major OEMs due to its tendency to induce premature failures.[13] One persistent problem is that red phosphorus in epoxy molding compounds induces elevated leakage current in semiconductor devices.[14] Another problem was acceleration of hydrolysis reactions in PBT insulating material.[15]

Red phosphorus can also be used in the illicit production of methamphetamine and Krokodil.

Red phosphorus can be used as an elemental photocatalyst for hydrogen formation from the water.[16] They display a steady hydrogen evolution rates of 633 μmol/(h⋅g) by the formation of small-sized fibrous phosphorus.[17]

Violet or Hittorf's phosphorus

[edit]
Violet phosphorus (right) by a sample of red phosphorus (left)
Violet phosphorus structure
Hitorff's phosphorus structure

Monoclinic phosphorus, or violet phosphorus, is also known as Hittorf's metallic phosphorus.[18][19] In 1865, Johann Wilhelm Hittorf heated red phosphorus in a sealed tube at 530 °C. The upper part of the tube was kept at 444 °C. Brilliant opaque monoclinic, or rhombohedral, crystals sublimed as a result. Violet phosphorus can also be prepared by dissolving white phosphorus in molten lead in a sealed tube at 500 °C for 18 hours. Upon slow cooling, Hittorf's allotrope crystallises out. The crystals can be revealed by dissolving the lead in dilute nitric acid followed by boiling in concentrated hydrochloric acid.[20] In addition, a fibrous form exists with similar phosphorus cages. The lattice structure of violet phosphorus was presented by Thurn and Krebs in 1969.[21] Imaginary frequencies, indicating the irrationalities or instabilities of the structure, were obtained for the reported violet structure from 1969.[22] The single crystal of violet phosphorus was also produced. The lattice structure of violet phosphorus has been obtained by single-crystal x-ray diffraction to be monoclinic with space group of P2/n (13) (a = 9.210, b = 9.128, c = 21.893 Å, β = 97.776°, CSD-1935087). The optical band gap of the violet phosphorus was measured by diffuse reflectance spectroscopy to be around 1.7 eV. The thermal decomposition temperature was 52 °C higher than its black phosphorus counterpart. The violet phosphorene was easily obtained from both mechanical and solution exfoliation.

Reactions of violet phosphorus

[edit]

Violet phosphorus does not ignite in air until heated to 300 °C and is insoluble in all solvents. It is not attacked by alkali and only slowly reacts with halogens. It can be oxidised by nitric acid to phosphoric acid.

If it is heated in an atmosphere of inert gas, for example nitrogen or carbon dioxide, it sublimes and the vapour condenses as white phosphorus. If it is heated in a vacuum and the vapour condensed rapidly, violet phosphorus is obtained. It would appear that violet phosphorus is a polymer of high relative molecular mass, which on heating breaks down into P2 molecules. On cooling, these would normally dimerize to give P4 molecules (i.e. white phosphorus) but, in a vacuum, they link up again to form the polymeric violet allotrope.

Black phosphorus

[edit]
Black phosphorus ampoule
Black phosphorus
Black phosphorus structure

Black phosphorus is the thermodynamically stable form of phosphorus at room temperature and pressure, with a heat of formation of −39.3 kJ/mol (relative to white phosphorus which is defined as the standard state).[1] It was first synthesized by heating white phosphorus under high pressures (12,000 atmospheres) in 1914. As a 2D material, in appearance, properties, and structure, black phosphorus is very much like graphite with both being black and flaky, a conductor of electricity, and having puckered sheets of linked atoms.[23]

Black phosphorus has an orthorhombic pleated honeycomb structure and is the least reactive allotrope, a result of its lattice of interlinked six-membered rings where each atom is bonded to three other atoms.[24][25] In this structure, each phosphorus atom has five outer shell electrons.[26] Black and red phosphorus can also take a cubic crystal lattice structure.[27] The first high-pressure synthesis of black phosphorus crystals was made by the Nobel prize winner Percy Williams Bridgman in 1914.[28] Metal salts catalyze the synthesis of black phosphorus.[29]

Black phosphorus based sensors exhibit several superior qualities over traditional materials used in piezoelectric or resistive sensors. Characterized by its unique puckered honeycomb lattice structure, black phosphorus provides exceptional carrier mobility. This property ensures its high sensitivity and mechanical resilience, making it an intriguing candidate for sensor technology.[30][31]

Phosphorene

[edit]
Main article: phosphorene

The similarities to graphite also include the possibility of scotch-tape delamination (exfoliation), resulting in phosphorene, a graphene-like 2D material with excellent charge transport properties, thermal transport properties and optical properties. Distinguishing features of scientific interest include a thickness dependent band-gap, which is not found in graphene.[32] This, combined with a high on/off ratio of ~105 makes phosphorene a promising candidate for field-effect transistors (FETs).[33] The tunable bandgap also suggests promising applications in mid-infrared photodetectors and LEDs.[34][35] Exfoliated black phosphorus sublimes at 400 °C in vacuum.[36] It gradually oxidizes when exposed to water in the presence of oxygen, which is a concern when contemplating it as a material for the manufacture of transistors, for example.[37][38] Exfoliated black phosphorus is an emerging anode material in the battery community, showing high stability and lithium storage.[39]

Ring-shaped phosphorus

[edit]

Ring-shaped phosphorus was theoretically predicted in 2007.[40] The ring-shaped phosphorus was self-assembled inside evacuated multi-walled carbon nanotubes with inner diameters of 5–8 nm using a vapor encapsulation method. A ring with a diameter of 5.30 nm, consisting of 23 P8 and 23 P2 units with a total of 230 P atoms, was observed inside a multi-walled carbon nanotube with an inner diameter of 5.90 nm in atomic scale. The distance between neighboring rings is 6.4 Å.[41]

The P6 ring shaped molecule is not stable in isolation.

Blue phosphorus

[edit]

Single-layer blue phosphorus was first produced in 2016 by the method of molecular beam epitaxy from black phosphorus as precursor.[42]

Diphosphorus

[edit]
Main article: Diphosphorus
Structure of diphosphorus
Diphosphorus molecule

The diphosphorus allotrope (P2) can normally be obtained only under extreme conditions (for example, from P4 at 1100 kelvin). In 2006, the diatomic molecule was generated in homogeneous solution under normal conditions with the use of transition metal complexes (for example, tungsten and niobium).[43]

Diphosphorus is the gaseous form of phosphorus, and the thermodynamically stable form between 1200 °C and 2000 °C. The dissociation of tetraphosphorus (P4) begins at lower temperature: the percentage of P2 at 800 °C is ≈ 1%. At temperatures above about 2000 °C, the diphosphorus molecule begins to dissociate into atomic phosphorus.

Phosphorus nanorods

[edit]

P12 nanorod polymers were isolated from CuI-P complexes using low temperature treatment.[44]

Red/brown phosphorus was shown to be stable in air for several weeks and have properties distinct from those of red phosphorus. Electron microscopy showed that red/brown phosphorus forms long, parallel nanorods with a diameter between 3.4 Å and 4.7 Å.[44]

Properties

[edit]
Properties of some allotropes of phosphorus[45][46]
Form white(α) white(β) violet black
Symmetry Body-centred cubic Triclinic Monoclinic Orthorhombic
Pearson symbol aP24 mP84 oS8
Space group I43m P1 No. 2 P2/c No. 13 Cmca No. 64
Density (g/cm3) 1.828 1.88 2.36 2.69
Bandgap (eV) 2.1 1.5 0.34
Refractive index 1.8244 2.6 2.4

See also

[edit]

References

[edit]
  1. ^ a b c d Housecroft, C. E.; Sharpe, A. G. (2004). Inorganic Chemistry (2nd ed.). Prentice Hall. p. 392. ISBN 978-0-13-039913-7.
  2. ^ a b Durif, A.; Averbuch-Pouchot, M.T. (1996). Topics in phosphate chemistry. Singapore [u.a.]: World Scientific. p. 3. ISBN 978-981-02-2634-3.
  3. ^ a b Simon, Arndt; Borrmann, Horst; Horakh, Jörg (1997). "On the Polymorphism of White Phosphorus". Chemische Berichte. 130 (9): 1235–1240. doi:10.1002/cber.19971300911.
  4. ^ Cossairt, Brandi M.; Cummins, Christopher C.; Head, Ashley R.; Lichtenberger, Dennis L.; Berger, Raphael J. F.; Hayes, Stuart A.; Mitzel, Norbert W.; Wu, Gang (2010-06-01). "On the Molecular and Electronic Structures of AsP3 and P4". Journal of the American Chemical Society. 132 (24): 8459–8465. doi:10.1021/ja102580d. ISSN 0002-7863. PMID 20515032.
  5. ^ "A dangerous guide to beachcombing".
  6. ^ "Woman mistakes WWII-era munition for precious stone on German beach | DW | 05.08.2017". Deutsche Welle.
  7. ^ Threlfall, R.E., (1951). 100 years of Phosphorus Making: 1851–1951. Oldbury: Albright and Wilson Ltd
  8. ^ Engel, Robert; Cohen, JaimeLee Iolani (2004). Synthesis of Carbon-Phosphorus Bonds (2nd ed.). Boca Raton: CRC Press. §2.3. ISBN 0-8493-1617-0. LCCN 2003060796.
  9. ^ a b Chemistry Part I Class XII (PDF) (Reprinted ed.). India: NCERT. January 2019. p. 177. ISBN 81-7450-648-9.
  10. ^ a b c Corbridge, D. E. C. (1995) "Phosphorus: An Outline of its Chemistry, Biochemistry, and Technology" 5th Edition Elsevier: Amsterdam. § 4.1.12. ISBN 0-444-89307-5.
  11. ^ Streubel, Rainer (1995). "Phosphaalkyne Cyclooligomers: From Dimers to Hexamers—First Steps on the Way to Phosphorus–Carbon Cage Compounds". Angewandte Chemie International Edition in English. 34 (4): 436–438. doi:10.1002/anie.199504361.
  12. ^ Kohn, Moritz (1944-11-01). "The discovery of red phosphorus (1847) by Anton von Schrötter (1802–1875)". Journal of Chemical Education. 21 (11): 522. Bibcode:1944JChEd..21..522K. doi:10.1021/ed021p522. ISSN 0021-9584.
  13. ^ "Red Phosphorus Reliability Alert" (PDF). Archived from the original (PDF) on 2018-01-02. Retrieved 2018-01-01.
  14. ^ Craig Hillman, Red Phosphorus Induced Failures in Encapsulated Circuits, https://www.dfrsolutions.com/hubfs/Resources/services/Red-Phosphorus-Induced-Failures-in-Encapsulated-Circuits.pdf?t=1513022462214
  15. ^ Dock Brown, The Return of the Red Retardant, SMTAI 2015, https://www.dfrsolutions.com/hubfs/Resources/services/The-Return-of-the-Red-Retardant.pdf?t=1513022462214
  16. ^ Applied Catalysis B: Environmental, 2012, 111–112, 409–414.
  17. ^ Angewandte Chemie International Edition, 2016, 55, 9580–9585.
  18. ^ Curry, Roger (2012-07-08). "Hittorf's Metallic Phosphorus of 1865". LATERAL SCIENCE. Retrieved 16 November 2014.
  19. ^ Monoclinic phosphorus formed from vapor in the presence of an alkali metal U.S. patent 4,620,968
  20. ^ Hittorf, W. (1865). "Zur Kenntniss des Phosphors". Annalen der Physik. 202 (10): 193–228. Bibcode:1865AnP...202..193H. doi:10.1002/andp.18652021002.
  21. ^ Thurn, H.; Krebs, H. (1969-01-15). "Über Struktur und Eigenschaften der Halbmetalle. XXII. Die Kristallstruktur des Hittorfschen Phosphors". Acta Crystallographica Section B (in German). 25 (1): 125–135. Bibcode:1969AcCrB..25..125T. doi:10.1107/S0567740869001853. ISSN 0567-7408.
  22. ^ Zhang, Lihui; Huang, Hongyang; Zhang, Bo; Gu, Mengyue; Zhao, Dan; Zhao, Xuewen; Li, Longren; Zhou, Jun; Wu, Kai; Cheng, Yonghong; Zhang, Jinying (2020). "Structure and Properties of Violet Phosphorus and Its Phosphorene Exfoliation". Angewandte Chemie. 132 (3): 1090–1096. Bibcode:2020AngCh.132.1090Z. doi:10.1002/ange.201912761. ISSN 1521-3757. PMID 31713959. S2CID 241932000.
  23. ^ Korolkov, Vladimir V.; Timokhin, Ivan G.; Haubrichs, Rolf; Smith, Emily F.; Yang, Lixu; Yang, Sihai; Champness, Neil R.; Schröder, Martin; Beton, Peter H. (2017-11-09). "Supramolecular networks stabilise and functionalise black phosphorus". Nature Communications. 8 (1): 1385. Bibcode:2017NatCo...8.1385K. doi:10.1038/s41467-017-01797-6. ISSN 2041-1723. PMC 5680224. PMID 29123112.
  24. ^ Brown, A.; Rundqvist, S. (1965). "Refinement of the crystal structure of black phosphorus". Acta Crystallographica. 19 (4): 684–685. Bibcode:1965AcCry..19..684B. doi:10.1107/S0365110X65004140.
  25. ^ Cartz, L.; Srinivasa, S. R.; Riedner, R. J.; Jorgensen, J. D.; Worlton, T. G. (1979). "Effect of pressure on bonding in black phosphorus". The Journal of Chemical Physics. 71 (4): 1718. Bibcode:1979JChPh..71.1718C. doi:10.1063/1.438523.
  26. ^ Ling, Xi; Wang, Han; Huang, Shengxi; Xia, Fengnian; Dresselhaus, Mildred S. (2015-03-27). "The renaissance of black phosphorus". Proceedings of the National Academy of Sciences. 112 (15): 4523–4530. arXiv:1503.08367. Bibcode:2015PNAS..112.4523L. doi:10.1073/pnas.1416581112. ISSN 0027-8424. PMC 4403146. PMID 25820173.
  27. ^ Ahuja, Rajeev (2003). "Calculated high pressure crystal structure transformations for phosphorus". Physica Status Solidi B. 235 (2): 282–287. Bibcode:2003PSSBR.235..282A. doi:10.1002/pssb.200301569. S2CID 120578034.
  28. ^ Bridgman, P. W. (1914-07-01). "Two New Modifications of Phosphorus". Journal of the American Chemical Society. 36 (7): 1344–1363. doi:10.1021/ja02184a002. ISSN 0002-7863.
  29. ^ Lange, Stefan; Schmidt, Peer; Nilges, Tom (2007). "Au3SnP7@Black Phosphorus: An Easy Access to Black Phosphorus". Inorganic Chemistry. 46 (10): 4028–35. doi:10.1021/ic062192q. PMID 17439206.
  30. ^ Vaghasiya, Jayraj V.; Mayorga–Martinez, Carmen C.; Vyskočil, Jan; Pumera, Martin (2023-01-03). "Black phosphorous-based human-machine communication interface". Nature Communications. 14 (1): 2. Bibcode:2023NatCo..14....2V. doi:10.1038/s41467-022-34482-4. ISSN 2041-1723. PMC 9810665. PMID 36596775.
  31. ^ Chemistry, University of; Prague, Technology. "Black phosphorus–based human–machine communication interface: A breakthrough in assistive technology". techxplore.com. Retrieved 2023-06-16.
  32. ^ "Black Phosphorus Powder and Crystals". Ossila. Retrieved 2019-08-23.
  33. ^ Zhang, Yuanbo; Chen, Xian Hui; Feng, Donglai; Wu, Hua; Ou, Xuedong; Ge, Qingqin; Ye, Guo Jun; Yu, Yijun; Li, Likai (May 2014). "Black phosphorus field-effect transistors". Nature Nanotechnology. 9 (5): 372–377. arXiv:1401.4117. Bibcode:2014NatNa...9..372L. doi:10.1038/nnano.2014.35. ISSN 1748-3395. PMID 24584274. S2CID 17218693.
  34. ^ Wang, J.; Rousseau, A.; Yang, M.; Low, T.; Francoeur, S.; Kéna-Cohen, S. (2020). "Mid-infrared Polarized Emission from Black Phosphorus Light-Emitting Diodes". Nano Letters. 20 (5): 3651–3655. arXiv:1911.09184. Bibcode:2020NanoL..20.3651W. doi:10.1021/acs.nanolett.0c00581. PMID 32286837. S2CID 208202133.
  35. ^ Smith, B.; Vermeersch, B.; Carrete, J.; Ou, E.; Kim, J.; Li, S. (2017). "Temperature and Thickness Dependences of the Anisotropic In-Plane Thermal Conductivity of Black Phosphorus". Adv Mater. 29 (5): 1603756. Bibcode:2017AdM....2903756S. doi:10.1002/adma.201603756. OSTI 1533031. PMID 27882620. S2CID 5479539.
  36. ^ Liu, Xiaolong D.; Wood, Joshua D.; Chen, Kan-Sheng; Cho, EunKyung; Hersam, Mark C. (9 February 2015). "In Situ Thermal Decomposition of Exfoliated Two-Dimensional Black Phosphorus". Journal of Physical Chemistry Letters. 6 (5): 773–778. arXiv:1502.02644. doi:10.1021/acs.jpclett.5b00043. PMID 26262651. S2CID 24648672.
  37. ^ Wood, Joshua D.; Wells, Spencer A.; Jariwala, Deep; Chen, Kan-Sheng; Cho, EunKyung; Sangwan, Vinod K.; Liu, Xiaolong; Lauhon, Lincoln J.; Marks, Tobin J.; Hersam, Mark C. (7 November 2014). "Effective Passivation of Exfoliated Black Phosphorus Transistors against Ambient Degradation". Nano Letters. 14 (12): 6964–6970. arXiv:1411.2055. Bibcode:2014NanoL..14.6964W. doi:10.1021/nl5032293. PMID 25380142. S2CID 22128620.
  38. ^ Wu, Ryan J.; Topsakal, Mehmet; Low, Tony; Robbins, Matthew C.; Haratipour, Nazila; Jeong, Jong Seok; Wentzcovitch, Renata M.; Koester, Steven J.; Mkhoyan, K. Andre (2015-11-01). "Atomic and electronic structure of exfoliated black phosphorus". Journal of Vacuum Science & Technology A. 33 (6): 060604. Bibcode:2015JVSTA..33f0604W. doi:10.1116/1.4926753. ISSN 0734-2101.
  39. ^ Zheng, Weiran; Lee, Jeongyeon; Gao, Zhi-Wen; Li, Yong; Lin, Shenghuang; Lau, Shu Ping; Lee, Lawrence Yoon Suk (30 June 2020). "Laser-Assisted Ultrafast Exfoliation of Black Phosphorus in Liquid with Tunable Thickness for Li-Ion Batteries". Advanced Energy Materials. 10 (31): 1903490. doi:10.1002/aenm.201903490. hdl:10397/100139. S2CID 225707528.
  40. ^ Karttunen, Antti J.; Linnolahti, Mikko; Pakkanen, Tapani A. (15 June 2007). "Icosahedral and Ring-Shaped Allotropes of Phosphorus". Chemistry – A European Journal. 13 (18): 5232–5237. doi:10.1002/chem.200601572. PMID 17373003.
  41. ^ Zhang, Jinying; Zhao, Dan; Xiao, Dingbin; Ma, Chuansheng; Du, Hongchu; Li, Xin; Zhang, Lihui; Huang, Jialiang; Huang, Hongyang; Jia, Chun-Lin; Tománek, David; Niu, Chunming (6 February 2017). "Assembly of Ring-Shaped Phosphorus within Carbon Nanotube Nanoreactors". Angewandte Chemie International Edition. 56 (7): 1850–1854. doi:10.1002/anie.201611740. PMID 28074606.
  42. ^ Zhang, Jia Lin; Zhao, Songtao (30 June 2016). "Epitaxial Growth of Single Layer Blue Phosphorus: A New Phase of Two-Dimensional Phosphorus". Nano Letters. 16 (8): 4903–4908. Bibcode:2016NanoL..16.4903Z. doi:10.1021/acs.nanolett.6b01459. PMID 27359041.
  43. ^ Piro, Na; Figueroa, Js; Mckellar, Jt; Cummins, Cc (2006). "Triple-bond reactivity of diphosphorus molecules". Science. 313 (5791): 1276–9. Bibcode:2006Sci...313.1276P. doi:10.1126/science.1129630. PMID 16946068. S2CID 27740669.
  44. ^ a b Pfitzner, A; Bräu, Mf; Zweck, J; Brunklaus, G; Eckert, H (Aug 2004). "Phosphorus nanorods – two allotropic modifications of a long-known element". Angewandte Chemie International Edition in English. 43 (32): 4228–31. doi:10.1002/anie.200460244. PMID 15307095.
  45. ^ A. Holleman; N. Wiberg (1985). "XV 2.1.3". Lehrbuch der Anorganischen Chemie (33 ed.). de Gruyter. ISBN 978-3-11-012641-9.
  46. ^ Berger, L. I. (1996). Semiconductor materials. CRC Press. p. 84. ISBN 978-0-8493-8912-2.
[edit]
White phosphorus
Retrieved from "https://en.wikipedia.org/w/index.php?title=Allotropes_of_phosphorus&oldid=1234239946#Violet_or_Hittorf's_phosphorus"