Climbing wall
 | This article needs additional citations for verification. (March 2015) |
| Part of a series on |
| Climbing |
|---|
 |
| Lists |
| Types of rock climbing |
| Types of mountaineering |
| Other types |
| Key actions |
| Key terms |
A climbing wall is an artificially constructed wall with manufactured grips (or "holds") for the hands and feet. Most walls are located indoors, and climbing on such walls is termed indoor climbing. Some walls are brick or wooden constructions, but on most modern walls, the material most often used is a thick multiplex board with holes drilled into it. Recently, manufactured steel and aluminum have also been used. The wall may have places to attach belay ropes, but may also be used to practice lead climbing or bouldering.
Each hole contains a specially formed t-nut to allow modular climbing holds to be screwed onto the wall. With manufactured steel or aluminum walls, an engineered industrial fastener is used to secure climbing holds. The face of the multiplex board climbing surface is covered with textured products including concrete and paint or polyurethane loaded with sand. In addition to the textured surface and hand holds the wall may contain surface structures such as indentions (in cuts) and protrusions (bulges), or take the form of an overhang, underhang or crack. Some grips or handholds are formed to mimic the conditions of outdoor rock, including some that are oversized and can have other grips bolted onto them.
History
[edit]The earliest artificial climbing walls were typically small concrete faces with protrusions made of medium-sized rocks for hand holds. Schurman Rock in Seattle, WA is believed by some to be the first artificial climbing structure in the United States, constructed in 1939.[1]
The first artificial climbing wall in the world seems to be the wall commissioned by the King of Belgium Leopold III in 1937 near his palace. This was documented by Mark Sebille in his book Bel'Wall.[2]
The modern artificial climbing wall began in the UK. The first wall was created in 1964 by Don Robinson, a lecturer in Physical Education at the University of Leeds, by inserting pieces of rock into a corridor wall.[3] The first commercial wall in the UK, The Foundry Climbing Centre, was built in Sheffield in 1991, traditionally England's centre for climbing due to its proximity to the Peak District.[4]The first indoor climbing gym in the United States was established by Vertical World in Seattle in 1987.[5] Terre Neuve in the heart of Brussels (Belgium) was opened in 1987 as well. It is not clear which gym was opened first.[6][7]
Types
[edit]
The simplest type of wall is of plywood construction, known colloquially in the climbing community as a 'woody', with a combination of either bolt-on holds or screw-on holds. Bolt-on holds are fixed to a wall with iron bolts that are inserted through the hold, which will have specific bolt points, and then fixed into pre-allocated screw-threaded holes in the wall. Screw-on holds are, by contrast, usually much smaller, owing to the nature of their fixing. These holds are connected to the wall by screws, which may be fastened anywhere on the wall's surface.
Some other types of walls include slabs of granite, concrete sprayed onto a wire mesh, pre-made fiberglass panels, large trees, manufactured steel and aluminum panels, textured fiberglass walls, and inflatables. A newer innovation is the rotating climbing wall: a mechanical, mobile wall that rotates like a treadmill to match your climbing rate of ascent.
The most common construction method involves bolting resin hand and foot holds onto wooden boards. The boards can be of varying height & steepness (from completely horizontal 'roofs' to near-vertical 'slabs') with a mixture of holds attached. These can vary from very small 'crimps', and 'pinches', and slanted-surfaced 'slopers', to 'jugs', which are often large and easy to hold. This variety, coupled with the ability for the climbs to be changed by moving the holds to new positions on the wall, has resulted in indoor climbing becoming a very popular sport.
Equipment
[edit]Proper climbing equipment must be used during indoor climbing.[8] Most climbing gyms lend harnesses, ropes and belay devices. Some also lend climbing shoes and chalk bags. Some climbing gyms require use of chalk balls (as opposed to loose chalk) to reduce chalk dust in the air and chalk spills when a chalk bag is tipped over or stepped on. Reducing chalk in the air helps to avoid clogging ventilation systems and reduces the dust that accumulates on less-than-vertical surfaces.
Indoor climbing
[edit]Indoor climbing is an increasingly popular form of rock climbing performed on artificial structures that attempt to mimic the experience of outdoor rock. The first indoor climbing gym in North America, Vertical World in Seattle, was established in 1987.[5] The first indoor climbing hall in the world was inaugurated in Brussels, Belgium on May 16, 1987, by Isabelle Dorsimond and Marc Bott.[2] Terres Neuves integrated the concept of pre-drilled plywood walls fitted with T-nuts, as developed in 1986 by the Brussels-based firm Alpi'In. Pierre d'Haenens is the inventor of this system, which is now used worldwide by all climbing wall manufacturers. Terres Neuves still exists today in an almost unchanged form.[9]
The first indoor walls tended to be made primarily of brick, which limited the steepness of the wall and variety of the hand holds.[10] More recently, indoor climbing terrain is constructed of plywood over a metal frame, with bolted-on plastic hand and footholds, and sometimes spray-coated with texture to simulate a rock face.
Most[quantify] climbing competitions are held in climbing gyms, making them a part of indoor climbing.[citation needed]
Compared to outdoor climbing
[edit]Indoor and outdoor climbing can differ in techniques, style, and equipment. Climbing artificial walls, especially indoors, is much safer because anchor points and holds are able to be more firmly fixed, and environmental conditions can be controlled. During indoor climbing, holds are easily visible in contrast with natural walls where finding a good hold or foothold may be a challenge. Climbers on artificial walls are somewhat restricted to the holds prepared by the route setter, whereas on natural walls they can use every slope or crack in the surface of the wall. Some typical rock formations can be difficult to emulate on climbing walls.[11]
Routes and grading
[edit]
Holds come in different colours, those of the same colour often being used to denote a route, allowing routes of different difficulty levels to be overlaid on one another. Coloured tape placed under climbing holds is another way that is often used to mark different climbing routes. In attempting a given route, a climber is only allowed to use grips of the designated colour as handholds, but is usually allowed to use both handholds and footholds of the designated colour and surface structures and textures of the "rockface" as footholds.
The grade (difficulty) of the route is usually a consensus decision between the setter of the route and the first few people who climb the route. Many indoor climbing walls have people who are assigned to set these different climbing routes. These people are called route setters or course setters. As indoor climbing walls are often used to check the development of climbers' abilities, climbs are color-coded.
Route-setting is the design of routes by placing climbing holds in a strategic, technical, and fun way that sets how the route will flow. There are many different techniques involved with setting, and up to 5 levels of certifications are awarded to those qualified. Route setting can be defined as the backbone of indoor climbing; without a great set of routes, a gym cannot easily hope to keep a good hoard of climbers.
Gallery
[edit]-
Climbing a rock-textured wall with belay, modular hand holds, incuts, and protrusions -
An outdoor climbing wall at the University of Bath, England -
-
A DIY climbing wall with a hole pattern that replicates Fitz Roy's famous peak -
Wood climbing wall -
-
Amager Bakke, Copenhagen: the world's tallest climbing wall at 85 meters. -
See also
[edit]References
[edit]- ^ "Rock climbing's history and rising popularity inspires Seattle festival". 2015-08-27. Archived from the original on 2021-02-11.
- ^ a b "Bel'Wall – Montana Books". Retrieved 4 April 2023.
- ^ John., White (2013). The indoor climbing manual. London: Bloomsbury Sport. pp. 9–10. ISBN 9781408186626. OCLC 855536351.
- ^ "The Foundry Climbing Centre". Welcome To Sheffield. Retrieved 2023-09-01.
- ^ a b Walsh, Megan (November 21, 2018). "The State of Climbing Gyms in 2018". Climbing. Retrieved June 10, 2021.
- ^ "LA SALLE TERRES NEUVES – Terres-Neuves". Retrieved 4 April 2023.
- ^ "La salle d'escalade, un nouveau concept". Cabbrabant.com (in French). 2006-09-04. Retrieved 2023-09-01.
- ^ "Equipment". Alumnus.caltech.edu. Retrieved 2013-02-03.
- ^ "De speeltuin van de koningen – Montana Books". Retrieved 20 September 2019.
- ^ "Scottish Climbing Wall History". Mountaineering Council of Scotland. 2008. Archived from the original on 2015-05-06.
- ^ "What is Indoor Climbing?". Abc-of-rockclimbing.com. 2011-06-02. Retrieved 2013-02-03.
External links
[edit]
- UK Climbing Wall Manufacturers Association
- Climbing Wall Association, a US non-profit, industry trade association
- Odin - UK Mobile Climbing Wall Specialists
- Indoorclimbing.com - a worldwide indoor climbing gym list.
- The British Mountaineering Council
- The Mountaineering Council of Scotland - indoor climbing page.
| Authority control databases: National |
|---|
