Jump to content

Liberty ship

From Wikipedia, the free encyclopedia
(Redirected from Liberty ships)
This article is about the class of US cargo ship. For ships named "Liberty", see Liberty (ship).

SS John W. Brown, one of four surviving Liberty ships, photographed in 2000
Class overview
NameLiberty ship
Builders18 shipyards in the United States
CostUS$2 million ($43 million in 2024) per ship[1]
Planned2,751
Completed2,710
Active2 (Traveling museum ships)
Preserved4
General characteristics
Class and typeCargo ship
Tonnage7,176 GRT, 10,865 DWT[2]
Displacement14,245 long tons (14,474 t)[2]
Length441 ft 6 in (134.57 m)
Beam56 ft 10.75 in (17.3 m)
Draft27 ft 9.25 in (8.5 m)
Propulsion
  • Two oil-fired boilers
  • triple-expansion steam engine
  • single screw, 2,500 hp (1,900 kW)
Speed11–11.5 knots (20.4–21.3 km/h; 12.7–13.2 mph)
Range20,000 nmi (37,000 km; 23,000 mi)
Complement
ArmamentStern-mounted 4-in (102 mm) deck gun for use against surfaced submarines, variety of anti-aircraft guns

Liberty ships were a class of cargo ship built in the United States during World War II under the Emergency Shipbuilding Program. Although British in concept,[3] the design was adopted by the United States for its simple, low-cost construction. Mass-produced on an unprecedented scale, the Liberty ship came to symbolize U.S. wartime industrial output.[4]

The class was developed to meet British orders for transports to replace ships that had been lost. Eighteen American shipyards built 2,710 Liberty ships between 1941 and 1945 (an average of three ships every two days),[5] easily the largest number of ships ever produced to a single design.

Their production mirrored (albeit on a much larger scale) the manufacture of "Hog Islander" and similar standardized ship types during World War I. The immensity of the effort, the number of ships built, the role of female workers in their construction, and the survival of some far longer than their original five-year design life combine to make them the subject of much continued interest.

History[edit]

Design[edit]

Profile plan of a Liberty ship
A colored diagram of compartments on a ship
A colored diagram of compartments on a Liberty ship, from the right side, front to the right
  Machinery spaces
  Command and control
  Liquid stores
  Dry cargo
  Engine room
  Misc
  Dry stores
  Habitation

In 1936, the American Merchant Marine Act was passed to subsidize the annual construction of 50 commercial merchant vessels which could be used in wartime by the United States Navy as naval auxiliaries, crewed by U.S. Merchant Mariners. The number was doubled in 1939 and again in 1940 to 200 ships a year. Ship types included two tankers and three types of merchant vessel, all to be powered by steam turbines. Limited industrial capacity, especially for reduction gears, meant that relatively few of these designs of ships were built.

However, in 1940, the British government ordered 60 Ocean-class freighters from American yards to replace war losses and boost the merchant fleet. These were simple but fairly large (for the time) with a single 2,500 horsepower (1,900 kW) compound steam engine of outdated but reliable design. Britain specified coal-fired plants, because it then had extensive coal mines and no significant domestic oil production.[7]

The predecessor designs, which included the "Northeast Coast, Open Shelter Deck Steamer", were based on a simple ship originally produced in Sunderland by J.L. Thompson & Sons based on a 1939 design for a simple tramp steamer, which was cheap to build and cheap to run (see Silver Line). Examples include SS Dorington Court built in 1939.[8] The order specified an 18-inch (0.46 m) increase in draft to boost displacement by 800 long tons (810 t) to 10,100 long tons (10,300 t). The accommodation, bridge, and main engine were located amidships, with a tunnel connecting the main engine shaft to the propeller via a long aft extension. The first Ocean-class ship, SS Ocean Vanguard, was launched on 16 August 1941.

140-ton vertical triple expansion steam engine of the type used to power World War II Liberty ships, assembled for testing before delivery

The design was modified by the United States Maritime Commission, in part to increase conformity to American construction practices, but more importantly to make it even quicker and cheaper to build. The US version was designated 'EC2-S-C1': 'EC' for Emergency Cargo, '2' for a ship between 400 and 450 feet (120 and 140 m) long (Load Waterline Length), 'S' for steam engines, and 'C1' for design C1. The new design replaced much riveting, which accounted for one-third of the labor costs, with welding, and had oil-fired boilers. It was adopted as a Merchant Marine Act design, and production awarded to a conglomerate of West Coast engineering and construction companies headed by Henry J. Kaiser known as the Six Companies. Liberty ships were designed to carry 10,000 long tons (10,200 t) of cargo, usually one type per ship, but, during wartime, generally carried loads far exceeding this.[9]

On 27 March 1941, the number of lend-lease ships was increased to 200 by the Defense Aid Supplemental Appropriations Act and increased again in April to 306, of which 117 would be Liberty ships.

Variants[edit]

The basic EC2-S-C1 cargo design was modified during construction into three major variants with the same basic dimensions and slight variance in tonnage. One variant, with basically the same features but different type numbers, had four rather than five holds served by large hatches and kingpost with large capacity booms. Those four hold ships were designated for transport of tanks and boxed aircraft.[10]

In the detailed Federal Register publication of the post war prices of Maritime Commission types the Liberty variants are noted as:[10]

EC2-S-AW1
Collier (All given names of coal seams as SS Banner Seam, Beckley Seam and Bon Air Seam)
Z-EC2-S-C2
Tank carrier (four holds, kingposts) – example SS Frederic C. Howe[a]
Z-ET1-S-C3
T1 tanker – example SS Carl R. Gray. Eighteen were commissioned into USN in 1943 as the Armadillo-class tanker
Z-EC2-S-C5
Boxed aircraft transport (four holds, kingposts) – example SS Charles A. Draper.[b] Post war 16 of these Liberty ships were converted 1954–1958 into Guardian-class radar picket ship

In preparation for the Normandy landings and afterward to support the rapid expansion of logistical transport ashore a modification was made to make standard Liberty vessels more suitable for mass transport of vehicles and in records are seen as "MT" for Motor Transport vessels. As MTs four holds were loaded with vehicles while the fifth was modified to house the drivers and assistants.[11]

The modifications into troop transports also were not given special type designations.

Propulsion[edit]

Engine room (model cutaway)

By 1941, the steam turbine was the preferred marine steam engine because of its greater efficiency compared to earlier reciprocating compound steam engines. However, steam turbine engines required very precise manufacturing techniques to machine their complicated double helical reduction gears, and the companies capable of producing them were already committed to the large construction program for warships. Therefore, a 140-short-ton (130 t)[12] vertical triple expansion steam engine, of obsolete design, was selected to power Liberty ships because it was cheaper and easier to build in the numbers required for the Liberty ship program, and because more companies could manufacture it. Eighteen different companies eventually built the engine. It had the additional advantage of ruggedness, simplicity and familiarity to seamen. Parts manufactured by one company were interchangeable with those made by another, and the openness of its design made most of its moving parts easy to see, access, and oil. The engine—21 feet (6.4 m) long and 19 feet (5.8 m) tall—was designed to operate at 76 rpm and propel a Liberty ship at about 11 knots (20 km/h; 13 mph).[13]

Construction[edit]

The ships were constructed of sections that were welded together. This is similar to the technique used by Palmer's at Jarrow, northeast England, but substituted welding for riveting. Riveted ships took several months to construct. The work force was newly trained as the yards responsible had not previously built welded ships. As America entered the war, the shipbuilding yards employed women, to replace men who were enlisting in the armed forces.[14]

  • The construction of a Liberty ship at the Bethlehem-Fairfield Shipyards, Baltimore, Maryland, in March/April 1943
  • Day 2 : Laying of the keel plates
    Day 2 : Laying of the keel plates
  • Day 6 : Bulkheads and girders below the second deck are in place.
    Day 6 : Bulkheads and girders below the second deck are in place.
  • Day 10 : Lower deck being completed and the upper deck amidship erected
    Day 10 : Lower deck being completed and the upper deck amidship erected
  • Day 14 : Upper deck erected and mast houses and the after-deck house in place
    Day 14 : Upper deck erected and mast houses and the after-deck house in place
  • Day 24 : Ship ready for launching
    Day 24 : Ship ready for launching
Launch of SS Patrick Henry, the first Liberty ship, on 27 September 1941

The ships initially had a poor public image owing to their appearance. In a speech announcing the emergency shipbuilding program President Franklin D. Roosevelt had referred to the ship as "a dreadful looking object", and Time called it an "Ugly Duckling". 27 September 1941 was dubbed Liberty Fleet Day to try to assuage public opinion, since the first 14 "Emergency" vessels were launched that day. The first of these was SS Patrick Henry, launched by President Roosevelt. In remarks at the launch ceremony FDR cited Patrick Henry's 1775 speech that finished "Give me liberty or give me death". Roosevelt said that this new class of ship would bring liberty to Europe, which gave rise to the name Liberty ship.

The first ships required about 230 days to build (Patrick Henry took 244 days), but the median production time per ship dropped to 39 days by 1943.[15] The record was set by SS Robert E. Peary, which was launched 4 days and 151⁄2 hours after the keel had been laid, although this publicity stunt was not repeated: in fact much fitting-out and other work remained to be done after the Peary was launched. The ships were made assembly-line style, from prefabricated sections. In 1943 three Liberty ships were completed daily. They were usually named after famous Americans, starting with the signatories of the Declaration of Independence. 17 of the Liberty ships were named in honor of outstanding African-Americans. The first, in honor of Booker T. Washington, was christened by Marian Anderson in 1942, and the SS Harriet Tubman, recognizing the only woman on the list, was christened on 3 June 1944.[16]

Any group that raised war bonds worth $2 million could propose a name. Most bore the names of deceased people. The only living namesake was Francis J. O'Gara, the purser of SS Jean Nicolet, who was thought to have been killed in a submarine attack, but in fact survived the war in a Japanese prisoner of war camp. Not named after people were: SS Stage Door Canteen, named after the USO club in New York; and SS U.S.O., named after the United Service Organizations (USO).[17]

Another notable Liberty ship was SS Stephen Hopkins, which sank the German commerce raider Stier in a ship-to-ship gun battle in 1942 and became the first American ship to sink a German surface combatant.

Eastine Cowner, a former waitress, at work on the Liberty ship SS George Washington Carver at the Kaiser shipyards, Richmond, California, in 1943. One of a series taken by E. F. Joseph on behalf of the Office of War Information, documenting the work of African-Americans in the war effort

The wreck of SS Richard Montgomery lies off the coast of Kent with 1,500 short tons (1,400 tonnes) of explosives still on board, enough to match a very small yield nuclear weapon should they ever go off.[18][19] SS E. A. Bryan detonated with the energy of 2,000 tons of TNT (8,400 GJ) in July 1944 as it was being loaded, killing 320 sailors and civilians in what was called the Port Chicago disaster. Another Liberty ship that exploded was the rechristened SS Grandcamp, which caused the Texas City Disaster on 16 April 1947, killing at least 581 people.

Six Liberty ships were converted at Point Clear, Alabama, by the United States Army Air Force, into floating aircraft repair depots, operated by the Army Transport Service, starting in April 1944. The secret project, dubbed "Project Ivory Soap", provided mobile depot support for B-29 Superfortress bombers and P-51 Mustang fighters based on Guam, Iwo Jima, and Okinawa beginning in December 1944. The six ARU(F)s (Aircraft Repair Unit, Floating), however, were also fitted with landing platforms to accommodate four Sikorsky R-4 helicopters, where they provided medical evacuation of combat casualties in both the Philippine Islands and Okinawa.[20]

The last new-build Liberty ship constructed was SS Albert M. Boe, launched on 26 September 1945 and delivered on 30 October 1945. She was named after the chief engineer of a United States Army freighter who had stayed below decks to shut down his engines after a 13 April 1945 explosion, an act that won him a posthumous Merchant Marine Distinguished Service Medal.[21] In 1950, a "new" liberty ship was constructed by Industriale Maritime SpA, Genoa, Italy by using the bow section of Bert Williams and the stern section of Nathaniel Bacon, both of which had been wrecked. The new ship was named SS Boccadasse, and served until scrapped in 1962.[22][23]

Several designs of mass-produced petroleum tanker were also produced, the most numerous being the T2 tanker series, with about 490 built between 1942 and the end of 1945.

Problems[edit]

SS Jeremiah O'Brien

Hull cracks[edit]

Early Liberty ships suffered hull and deck cracks, and a few were lost due to such structural defects. During World War II there were nearly 1,500 instances of significant brittle fractures. Twelve ships, including three of the 2,710 Liberty ships built, broke in half without warning, including SS John P. Gaines,[24][25] which sank on 24 November 1943 with the loss of 10 lives. Suspicion fell on the shipyards, which had often used inexperienced workers and new welding techniques to produce large numbers of ships in great haste. These incidents are what lead to the creation of the field of materials science.

The Ministry of War Transport borrowed the British-built Empire Duke for testing purposes.[26] Constance Tipper of Cambridge University demonstrated that the fractures did not start in the welds, but were due to the embrittlement of the steel used;[27] however, the same steel used in riveted construction did not have this problem. She discovered that at a certain temperature, the steel the ships were changed from being ductile to brittle. This allowed cracks to form and propagate. This temperature is known as the critical ductile-brittle transition temperature. Ships in the North Atlantic were exposed to temperatures that could fall below this critical point.[28] The predominantly welded hull construction, effectively a continuous sheet of steel, allowed small cracks to propagate unimpeded, unlike in a hull made of separate plates riveted together. One common type of crack nucleated at the square corner of a hatch which coincided with a welded seam, both the corner and the weld acting as stress concentrators. Furthermore, the ships were frequently grossly overloaded, increasing stress, and some of the problems occurred during or after severe storms that would further have increased stress. Minor revisions to the hatches and various reinforcements were applied to the Liberty ships to arrest the cracking problem. These are some of the first structural tests that birthed the study of materials. The successor Victory ships used the same steel, also welded rather than riveted, but spacing between frames was widened from 30 inches (760 mm) to 36 inches (910 mm), making the ships less stiff and more able to flex.[citation needed]

Consequences and Results[edit]

The sinking of the Liberty ships led to a new way of thinking about ship design and manufacturing. Ships today avoid the use of rectangular corners to avoid stress concentration. New types of steel were developed that have higher fracture toughness, especially at lower temperatures. In addition, more talented and educated welders can produce welds without, or at least with fewer, flaws. While the context and time in which Liberty ships were constructed resulted in many failures, the lessons learned led to new innovations that allow for more efficient and safer shipbuilding today.[29]

Service[edit]

Use as troopships[edit]

Aerial photograph of the Liberty ship SS John W. Brown outbound from the United States carrying a large deck cargo after her conversion to a "Limited Capacity Troopship." It probably was taken in the summer of 1943 during her second voyage.

In September 1943 strategic plans and shortage of more suitable hulls required that Liberty ships be pressed into emergency use as troop transports with about 225 eventually converted for this purpose.[30] The first general conversions were hastily undertaken by the War Shipping Administration (WSA) so that the ships could join convoys on the way to North Africa for Operation Torch.[3] Even earlier the Southwest Pacific Area command's U.S. Army Services of Supply had converted at least one, William Ellery Channing, in Australia into an assault troop carrier with landing craft (LCIs and LCVs) and troops with the ship being reconverted for cargo after the Navy was given exclusive responsibility for amphibious assault operations.[31] Others in the Southwest Pacific were turned into makeshift troop transports for New Guinea operations by installing field kitchens on deck, latrines aft between #4 and #5 hatches flushed by hoses attached to fire hydrants and about 900 troops sleeping on deck or in 'tween deck spaces.[32] While most of the Liberty ships converted were intended to carry no more than 550 troops, thirty-three were converted to transport 1,600 on shorter voyages from mainland U.S. ports to Alaska, Hawaii and the Caribbean.[33]

The problem of hull cracks caused concern with the United States Coast Guard, which recommended that Liberty ships be withdrawn from troop carrying in February 1944 although military commitments required their continued use.[3] The more direct problem was the general unsuitability of the ships as troop transports, particularly with the hasty conversions in 1943, that generated considerable complaints regarding poor mess, food and water storage, sanitation, heating / ventilation and a lack of medical facilities.[3] After the Allied victory in North Africa, about 250 Liberty ships were engaged in transporting prisoners of war to the United States.[33] By November 1943 the Army's Chief of Transportation, Maj. Gen. Charles P. Gross, and WSA, whose agents operated the ships, reached agreement on improvements, but operational requirements forced an increase of the maximum number of troops transported in a Liberty from 350 to 500.[3] The increase in production of more suitable vessels did allow for returning the hastily converted Liberty ships to cargo-only operations by May 1944.[3] Despite complaints, reservations, Navy requesting its personnel not travel aboard Liberty troopers and even Senate comment, the military necessities required use of the ships. The number of troops was increased to 550 on 200 Liberty ships for redeployment to the Pacific. The need for the troopship conversions persisted into the immediate postwar period in order to return troops from overseas as quickly as possible.[3]

Combat[edit]

Seamen during shell loading practice aboard SS Lawton B. Evans in 1943

On 27 September 1942 the SS Stephen Hopkins was the only US merchant ship to sink a German surface combatant during the war. Ordered to stop, Stephen Hopkins refused to surrender, so the heavily armed German commerce raider Stier and her tender Tannenfels with one machine gun opened fire. Although greatly outgunned, the crew of Stephen Hopkins fought back, replacing the Armed Guard crew of the ship's single 4-inch (100 mm) gun with volunteers as they fell. The fight was short, and both ships were wrecks.[34]

On 10 March 1943 SS Lawton B. Evans became the only ship to survive an attack by the German submarine U-221.[35] The following year from 22 to 30 January 1944, Lawton B. Evans was involved in the Battle of Anzio in Italy. It was under repeated bombardment from shore batteries and aircraft for eight days. It endured a prolonged barrage of shelling, machine-gun fire and bombs. The ship shot down five German planes.[36]

After the war[edit]

SS Jeremiah O'Brien, 2022

More than 2,400 Liberty ships survived the war. Of these, 835 made up the postwar cargo fleet. Greek entrepreneurs bought 526 ships and Italians bought 98. Shipping magnates including John Fredriksen,[37] John Theodoracopoulos,[38] Aristotle Onassis,[39] Stavros Niarchos,[39] Stavros George Livanos, the Goulandris brothers,[39] and the Andreadis, Tsavliris, Achille Lauro, Grimaldi and Bottiglieri families were known to have started their fleets by buying Liberty ships. Andrea Corrado, the dominant Italian shipping magnate at the time, and leader of the Italian shipping delegation, rebuilt his fleet under the programme. Weyerhaeuser operated a fleet of six Liberty Ships (which were later extensively refurbished and modernized) carrying lumber, newsprint, and general cargo for years after the end of the war.

Some Liberty ships were lost after the war to naval mines that were inadequately cleared. Pierre Gibault was scrapped after hitting a mine in a previously cleared area off the Greek island of Kythira in June 1945,[40] and the same month saw Colin P. Kelly Jnr take mortal damage from a mine hit off the Belgian port of Ostend.[41] In August 1945, William J. Palmer was carrying horses from New York to Trieste when she rolled over and sank 15 minutes after hitting a mine a few miles from destination. All crew members, and six horses were saved.[42] Nathaniel Bacon ran into a minefield off Civitavecchia, Italy in December 1945, caught fire, was beached, and broke in two; the larger section was welded onto another Liberty half hull to make a new ship 30 feet longer, named Boccadasse.[43]

As late as December 1947, Robert Dale Owen, renamed Kalliopi and sailing under the Greek flag, broke in three and sank in the northern Adriatic Sea after hitting a mine.[44] Other Liberty ships lost to mines after the end of the war include John Woolman, Calvin Coolidge, Cyrus Adler, and Lord Delaware.[45]

On April 16, 1947, a Liberty ship owned by the Compagnie Générale Transatlantique called the Grandcamp (originally built as the SS Benjamin R. Curtis) docked in Texas City, Texas to load a cargo of 2,300 tons of ammonium nitrate fertilizer. A fire broke out on board which eventually caused the entire ammonium nitrate cargo to explode. The massive explosion levelled Texas City and caused fires which detonated more ammonium nitrate in a nearby ship and warehouse. It was one of the largest non-nuclear explosions in US history. This incident is known as the Texas City disaster today.[46]

Propeller of the Liberty ship Quartette which ran aground in 1952 on the Pearl and Hermes Atoll in the Pacific Ocean

On December 21, 1952, the SS Quartette, a 422-foot-long (129 m) Liberty Ship of 7,198 gross register tons, struck the eastern reef of the Pearl and Hermes atoll at a speed of 10.5 kn (19 km/h; 12 mph). The ship was driven further onto the reef by rough waves and 35 mph (56 km/h) winds, which collapsed the forward bow and damaged two forward holds.[47] The crew was evacuated by the SS Frontenac Victory the following day. The salvage tug Ono arrived on December 25 to attempt to tow the ship clear, but persistent stormy weather forced a delay of the rescue attempt. On January 3, before another rescue attempt could be made, the ship's anchors tore loose and the Quartette was blown onto the reef, and deemed a total loss. Several weeks later, it snapped in half at the keel and the two pieces sank.[48] The wreck site now serves as an artificial reef which provides a habitat for many fish species.[49]

In 1953, the Commodity Credit Corporation (CCC), began storing surplus grain in Liberty ships located in the Hudson River, James River, Olympia, and Astoria National Defense Reserve Fleet's. In 1955, 22 ships in the Suisun Bay Reserve Fleet were withdrawn to be loaded with grain and were then transferred to the Olympia Fleet. In 1956, four ships were withdrawn from the Wilmington Fleet and transferred, loaded with grain, to the Hudson River Fleet.[50]

Between 1955 and 1959, 16 former Liberty ships were repurchased by the United States Navy and converted to the Guardian-class radar picket ships for the Atlantic and Pacific Barrier.

In the 1960s, three Liberty ships and two Victory ships were reactivated and converted to technical research ships with the hull classification symbol AGTR (auxiliary, technical research) and used to gather electronic intelligence and for radar picket duties by the United States Navy. The Liberty ships SS Samuel R. Aitken became USS Oxford, SS Robert W. Hart became USS Georgetown, SS J. Howland Gardner became USS Jamestown with the Victory ships being SS Iran Victory which became USS Belmont and SS Simmons Victory becoming USS Liberty.[51][52][53][54][55] All of these ships were decommissioned and struck from the Naval Vessel Register in 1969 and 1970.

USS Liberty was a Belmont-class technical research ship (electronic spy ship) that was attacked by Israel Defense Forces during the 1967 Six-Day War. She was built and served in World War II as SS Simmons Victory, as a Victory cargo ship.

Liberty ships mothballed at Tongue Point, Astoria, Oregon, 1965
Liberty Ships mothballed at Tongue Point, Astoria, Oregon, 1965
Novorossiysk, delivered 1943 to USSR, sailed until 1974

From 1946 to 1963, the Pacific Ready Reserve Fleet – Columbia River Group, retained as many as 500 ships.[56]

In 1946, Liberty ships were mothballed in the Hudson River Reserve Fleet near Tarrytown, New York. At its peak in 1965, 189 hulls were stored there. The last two were sold for scrap to Spain in 1971 and the reserve permanently shut down.[57][58]

SS Hellas Liberty (ex-SS Arthur M. Huddell) in June 2010

Only two operational Liberty ships, SS John W. Brown and SS Jeremiah O'Brien, remain. John W. Brown has had a long career as a school ship and many internal modifications, while Jeremiah O'Brien remains largely in her original condition. Both are museum ships that still put out to sea regularly. In 1994, Jeremiah O'Brien steamed from San Francisco to England and France for the 50th anniversary of D-Day, the only large ship from the original Operation Overlord fleet to participate in the anniversary. In 2008, SS Arthur M. Huddell, a ship converted in 1944 into a pipe transport to support Operation Pluto,[59] was transferred to Greece and converted to a floating museum dedicated to the history of the Greek merchant marine;[60] although missing major components were restored this ship is no longer operational.

Liberty ships continue to serve in a "less than whole" function many decades after their launching. In Portland, Oregon, the hulls of Richard Henry Dana and Jane Addams serve as the basis of floating docks.[61] SS Albert M. Boe survives as the Star of Kodiak, a landlocked cannery, in Kodiak Harbor at

 WikiMiniAtlas
57°47′12″N 152°24′18″W / 57.78667°N 152.40500°W / 57.78667; -152.40500.

SS Charles H. Cugle was converted into MH-1A (otherwise known as USS Sturgis). MH-1A was a floating nuclear power plant and the first ever built. MH-1A was used to generate electricity at the Panama Canal Zone from 1968 to 1975. She was also used as a fresh water generating plant. She is anchored in the James River Reserve Fleet.[62] The ship was dismantled in 2019 in Brownsville, Texas.[63]

Fifty-eight Liberty ships were lengthened by 70 feet (21 m) starting in 1958,[64] giving them additional carrying capacity at a small additional cost.[64][citation needed] The bridges of most of these were also enclosed in the mid-1960s in accordance with a design by naval architect Ion Livas.

In the 1950s, the Maritime Administration instituted the Liberty Ship Conversion and Engine Improvement Program, which had a goal to increase the speed of Liberty ships to 15 knots (28 km/h; 17 mph), making them competitive with more modern designs, as well as gaining experience with alternate propulsion systems. Four ships were converted in the $11 million program.[65] SS Benjamin Chew had its existing condensers modified and a new superheater and geared turbine installed to give the ship 6,000 shp, up from 2,500. SS Thomas Nelson had its bow lengthened, diesel engines installed in place of the original steam engine, and movable cranes outfitted in place of the original cargo handling gear. The GTS (Gas Turbine Ship) John Sergeant had its bow extended, and its steam engine replaced with a General Electric gas turbine of 6,600 shp, connected to a reversible pitch propeller via reduction gearing. John Sergeant was considered overall to be a success, but problems with the reversible pitch propeller ended its trial after three years. GTS William Patterson had its bow extended and its steam engine replaced with 6 General Electric GE-14 free-piston gas generators, connected to two reversible turbines and capable of 6,000 shp total. William Patterson was considered to be a failure as reliability was poor and the scalability of the design was poor.[66][67] All four vessels were fueled with Bunker C fuel oil, though John Sergeant required a quality of fuel available at limited ports and also required further treatment to reduce contaminants.[68] Three were scrapped in 1971 or 1972 and the diesel-equipped Thomas Nelson was scrapped in 1981.

In 2011, the United States Postal Service issued a postage stamp featuring the Liberty ship as part of a set on the U.S. Merchant Marine.[69]

Shipyards[edit]

Liberty ships were built at eighteen shipyards located along the U.S. Atlantic, Pacific and Gulf coasts:[70]

Survivors[edit]

Riveters from H. Hansen Industries work on the Liberty ship John W. Brown at Colonna's Shipyard, a ship repair facility located in the Port of Norfolk, Virginia. (December 2014)

There are four surviving Liberty Ships.

Ships in class[edit]

Main article: List of Liberty ships

World War II[edit]

Post World War II[edit]

See also[edit]

Notes[edit]

  1. ^ The Z-EC2-S-C2 Tank carrier type details had not been previously published until 17 August 1946 Federal Register.[10]
  2. ^ photo showing holds, kingposts

References[edit]

  1. ^ Wise & Baron 2004, p. 140
  2. ^ Jump up to: a b Sawyer & Mitchell 1985, p. 39.
  3. ^ Jump up to: a b c d e f g Wardlow, Chester (1999). The Technical Services – The Transportation Corps: Responsibilities, Organization, and Operations. United States Army in World War II. Washington, D.C.: Center of Military History, United States Army. p. 156. LCCN 99490905.
  4. ^ Flippen, J. B. (April 2018). Speaker Jim Wright. Austin, Texas: University of Texas Press. p. 60. ISBN 9781477315149. Archived from the original on 17 June 2022. Retrieved 29 November 2021. mass-produced during the war, the Liberty Ship had become a symbol of the miracle of American production
  5. ^ "Liberty Ships built by the United States Maritime Commission in World War II". usmm.org. American Merchant Marine at War. Archived from the original on 9 May 2008. Retrieved 28 November 2021. (2,710 ships were completed, as one burned at the dock.)
  6. ^ National Geographic, 2017. "Nazi Megastructures: Hitler's War Trains"
  7. ^ During WW II, Nazi Germany made the exact same decision, when they decided to mass-produce coal-powered, steam-engine driven Kriegslokomotives.[6] Despite electrical industrial technology having begun to replace stationary steam engines in the late 19th century, and Internal combustion engines in two-railcar, high speed Diesel-electric locomotive and train sets, developed by Maybach, were series produced in Germany since 1935, the war also made Germany short on oil, but still rich in coal, especially in the Ruhr region, and thus mass-produced old-fashioned but very effective steam locomotives for transporting goods and people across the large conquered European area.
  8. ^ "Dorington Court (1939)". Archived from the original on 1 July 2015. Retrieved 28 June 2015.
  9. ^ "Capacity of One Liberty Ship". Usmm.org. Retrieved 11 March 2022.
  10. ^ Jump up to: a b c Federal Register (PDF). Vol. 11. U.S. Government. 17 August 1946. p. 8974. Retrieved 20 June 2019.
  11. ^ Larson, Harold (1945). The Army's Cargo Fleet In World War II (PDF). Washington, D.C.: Office of the Chief of Transportation, Army Service Forces, U. S. Army. pp. 75–77. Archived (PDF) from the original on 3 August 2020. Retrieved 20 June 2019.
  12. ^ Live (the program of Project Liberty Ship provided for cruises of the Liberty ship SS John W. Brown, 2013 edition, claims both that the engine weighed 135 tons (p. 10) fully assembled and that it weighed 140 tons (p. 11).
  13. ^ Live (program of Project Liberty Ship provided for cruises of the Liberty ship SS John W. Brown, 2013 edition, p. 10.
  14. ^ Herman 2012, pp. 135–136, 178–180.
  15. ^ Davies 2004.
  16. ^ "African-Americans in the U.S. Merchant Marine and U.S. Maritime Service during World War II". Usmm.org. Retrieved 10 March 2022.
  17. ^ Reading 1: Liberty Ships National Park Service Cultural Resources.
  18. ^ "Report on the Wreck of the SS Richard Montgomery" (PDF). Webarchive.nationalarchives.gov.uk. Archived from the original (PDF) on 7 November 2012. Retrieved 11 March 2022.
  19. ^ "Little Boy and Fat Man". Atomic Heritage Foundation. 23 July 2014. Archived from the original on 24 December 2017. Retrieved 24 December 2017. Little Boy yield: 15 kilotons / Fat Man yield: 21 kilotons
  20. ^ "The Hoverfly in CBI, Carl Warren Weidenburner". Archived from the original on 22 October 2008. Retrieved 10 March 2022.
  21. ^ "SS Albert M. Boe". history.navy.mil. 2004. Archived from the original on 7 October 2012. Retrieved 7 May 2012.
  22. ^ "Liberty Ships – B". Mariners. Retrieved 6 January 2012.
  23. ^ "Liberty Ships – N–O". Mariners. Retrieved 6 January 2012.
  24. ^ "John P Gaines". Armed-guard.com. Archived from the original on 23 January 2007. Retrieved 10 March 2022.
  25. ^ X-FEM for Crack Propagation – Introduction Article which includes clear photograph of a ship broken in half.
  26. ^ Hedley-Whyte, John; Milamed, Debra R (2008). "Asbestos and Ship-Building: Fatal Consequences". Ulster Medical Journal. 77 (September 2008). Ulster Medical Society: 191–200. PMC 2604477. PMID 18956802.
  27. ^ "Constance Tipper". G.eng.cam.ac.uk. Retrieved 10 March 2022.
  28. ^ Kobayashi, Hideo (n.d.). Case Details - Brittle fracture of Liberty Ships. Failure Knowledge Database (Report). Association for the Study of Failure. The brittle fractures that occurred in the Liberty Ships were caused by low notch toughness at low temperature of steel at welded joint, which started at weld cracks or stress concentration points of the structure. External forces or residual stress due to welding progress the fracture. Almost all accidents by brittle fractures occurred in winter (low temperature). In some cases, residual stress is main cause of fracture.
  29. ^ Zhang, Wei (December 2016). "Technical Problem Identification for the Failures of the Liberty Ships". Challenges. 7 (2): 20. doi:10.3390/challe7020020. ISSN 2078-1547.
  30. ^ Wardlow, Chester (1956). The Technical Services – The Transportation Corps: Movements, Training, And Supply. United States Army In World War II. Washington, DC: Center Of Military History, United States Army. pp. 145–148. LCCN 55060003.
  31. ^ Masterson, Dr. James R. (1949). U. S. Army Transportation In The Southwest Pacific Area 1941–1947. Washington, D. C.: Transportation Unit, Historical Division, Special Staff, U. S. Army. pp. 570–571.
  32. ^ Bykofsky, Joseph; Larson, Harold (1990). The Technical Services – The Transportation Corps: Operations Overseas. United States Army In World War II. Washington, DC: Center Of Military History, United States Army. p. 450. LCCN 56060000.
  33. ^ Jump up to: a b Wardlow, Chester (1999). The Technical Services – The Transportation Corps: Responsibilities, Organization, And Operations. United States Army In World War II. Washington, DC: Center Of Military History, United States Army. pp. 300–301. LCCN 99490905.
  34. ^ Sawyer & Mitchell 1985, pp. 13, 141–142.
  35. ^ "Lawton B. Evans (American Steam merchant) – Ships hit by German U-boats during WWII". Gudmundur Helgason uboat.net. Retrieved 30 November 2016.
  36. ^ commons:File:SS_Lawton_B._Evans_Commendation.pdf[circular reference]
  37. ^ "John Fredriksen". Norsk Biografisk Lexsikon (in Norwegian). 25 February 2020. Retrieved 9 July 2020.
  38. ^ The Shipping World and Shipbuilding & Marine Engineering News, 1952, p. 148.
  39. ^ Jump up to: a b c Elphick 2006, p. 401
  40. ^ Elphick 2006, p. 309.
  41. ^ Elphick 2006, p. 166.
  42. ^ Elphick 2006, p. 271.
  43. ^ Elphick 2006, p. 108.
  44. ^ Elphick 2006, p. 402.
  45. ^ Elphick 2006, p. 325.
  46. ^ "Texas City Disaster Report".
  47. ^ "Papahānaumokuākea Expedition 2007: Liberty Ship SS Quartette". Sanctuaries.noaa.gov. Retrieved 11 June 2018.
  48. ^ "Papahānaumokuākea Marine National Monument: Liberty Ship SS Quartette". Papahanaumokuakea.gov. Retrieved 26 December 2017.
  49. ^ "Papahanaumokuakea Marine National Monument: Pearl and Hermes Atoll". Papahanaumokuakea.gov. Retrieved 26 December 2017.
  50. ^ Department of Agriculture Appropriations for 1961. 1960. Retrieved 28 January 2020.
  51. ^ Maritime Administration. "Samuel R. Aitken". Ship History Database. U.S. Department of Transportation, Maritime Administration. Archived from the original on 4 November 2016. Retrieved 1 November 2014.
  52. ^ Maritime Administration Vessel Status Card. "Robert W. Hart". Ship History Database. U.S. Department of Transportation, Maritime Administration. Archived from the original on 4 March 2016. Retrieved 1 November 2014.
  53. ^ Maritime Administration Vessel Status Card. "J. Howland Gardner". Ship History Database. U.S. Department of Transportation, Maritime Administration. Archived from the original on 4 March 2016. Retrieved 1 November 2014.
  54. ^ Maritime Administration Vessel Status Card. "Iran Victory". Ship History Database. U.S. Department of Transportation, Maritime Administration. Archived from the original on 4 March 2016. Retrieved 1 November 2014.
  55. ^ Maritime Administration Vessel Status Card. "Simmons Victory". Ship History Database. U.S. Department of Transportation, Maritime Administration. Archived from the original on 4 March 2016. Retrieved 1 November 2014.
  56. ^ "Tongue Point Navy Ship Yard". Archived from the original on 21 June 2015. Retrieved 24 April 2015.
  57. ^ "Hudson River National Defense Reserve Fleet". Navalmarinearchive.com. Archived from the original on 7 April 2014. Retrieved 11 March 2022.
  58. ^ Image: Mothball Fleet of WWII Liberty Ships in Hudson River off Jones Point 1957 Picture of mothballed liberty ships
  59. ^ Walker, Ashley (Historic American Engineering Record) (2009). "Operation "Pluto" – Arthur M. Huddell, James River Reserve Fleet, Newport News, VA". Library of Congress Prints and Photographs Division Washington, D.C. Retrieved 5 October 2014.
  60. ^ "The Hellas Liberty Project". Archived from the original on 3 March 2009.
  61. ^ "Did You Know: Liberty Ships Still Afloat in Portland". Archived from the original on 24 September 2015. Retrieved 24 September 2015.
  62. ^ Adams, Rod (1 November 1995). "Army Nuclear Power Plants". atomicinsights.com. Archived from the original on 15 April 2012. Retrieved 7 May 2012.
  63. ^ "Floating Nuclear Plant Sturgis Dismantled". The Maritime Executive. 16 March 2019. Retrieved 17 March 2019.
  64. ^ Jump up to: a b "The Calendar of Modern Shipping". modernshiphistory.com. 26 February 2010. Archived from the original on 26 February 2010. Retrieved 9 June 2014.
  65. ^ "Liberty ship new look" (PDF). Proceedings of the Merchant Marine Council. 12 (5): 85. May 1955. Retrieved 10 March 2022.
  66. ^ Specht D. Evaluation of free piston-gas turbine marine propulsion machinery in GTS William Patterson (1961) SAE
  67. ^ "Lykes Bros. Operates GTS William Patterson" (PDF). Proceedings of the Merchant Marine Council. 14 (11): 183. November 1957. Retrieved 10 March 2022.
  68. ^ National Research Council (U.S.) Innovation in the Maritime Industry (1979) Maritime Transportation Research Board pp. 127–131
  69. ^ "Postal Service Salutes U.S. Merchant Marine on Forever Stamps". Press Release. USPS. 28 July 2011. Retrieved 25 May 2012.
  70. ^ "WWII Construction Records, Private-Sector Shipyards that Built Ships for the U.S. Maritime Commission". Colton Company. Archived from the original on 13 November 2007. Retrieved 1 December 2007.
  71. ^ Jump up to: a b Veasey, Ashley (2009). "Liberty Shipyards: The Role of Savannah and Brunswick in the Allied Victory, 1941–1945". Georgia Historical Quarterly. 93 (2): 159–181. Retrieved 14 February 2018.
  72. ^ smallstatebighistory.com, SS William Coddington
  73. ^ Jump up to: a b c "Outboard Profiles of Maritime Commission Designed Vessels". drawings.usmaritimecommission.de.
  74. ^ Looking for trouble, the Guinea Pig Squadron
  75. ^ Pratt Victory photo, mine Hunter
  76. ^ "The Liberty ET- Tanker". www.aukevisser.nl.
  77. ^ usmaritimecommission.de E-EC2-S-C5 Tank carriers, Liberty ships
  78. ^ YAG-36
  79. ^ YAG-37
  80. ^ YAG-38
  81. ^ Maritime Administration. "R. Ney McNeely". Ship History Database Vessel Status Card. U.S. Department of Transportation, Maritime Administration. Retrieved 3 November 2017.
  82. ^ "ANDROS FAIRPLAY". Ships Nostalgia. 19 May 2009.
  83. ^ "Liberty Ships".

Footnotes[edit]

  1. ^ these bulk storage ships were USS Peter H. Burnett (IX-104), USS Antelope (IX-109), USS Don Marquis (IX-215), USS Triana (IX-223), USS Inca (IX-229)
  2. ^ USS George Eastman and USS Granville S. Hall were given the District Auxiliary, Miscellaneous (YAG) hull symbol
  3. ^ Three ships (MSC hull numbers 2802, 1122, and 2207) were converted and given hull symbols YAG-36, YAG-37, and YAG-38 respectively from the District Auxiliary, Miscellaneous (YAG) sequence. One ship SS R. Ney McNeely (MSC hull 1513) was also converted and was to have been given a YAG symbol but was returned to the inactive fleet after conversion and no YAG hull number was assigned
  4. ^ Sturgis was the actual name, but the USS prefix could not be used by an Army ship

Sources[edit]

Further reading[edit]

External links[edit]

Wikimedia Commons has media related to Liberty ships.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Liberty_ship&oldid=1226994433"