Fold change
 | This article needs additional citations for verification. (February 2010) |
Fold change is a measure describing how much a quantity changes between an original and a subsequent measurement. It is defined as the ratio between the two quantities; for quantities A and B the fold change of B with respect to A is B/A. In other words, a change from 30 to 60 is defined as a fold-change of 2. This is also referred to as a "one fold increase". Similarly, a change from 30 to 15 is referred to as a "0.5-fold decrease". Fold change is often used when analysing multiple measurements of a biological system taken at different times as the change described by the ratio between the time points is easier to interpret than the difference.
Fold change is so called because it is common to describe an increase of multiple X as an "X-fold increase". As such, several dictionaries, including the Oxford English Dictionary[1] and Merriam-Webster Dictionary,[2] as well as Collins's Dictionary of Mathematics, define "-fold" to mean "times", as in "2-fold" = "2 times" = "double". Likely because of this definition, many scientists use not only "fold", but also "fold change" to be synonymous with "times", as in "3-fold larger" = "3 times larger".[3][4][5]
Fold change is often used in analysis of gene expression data from microarray and RNA-Seq experiments for measuring change in the expression level of a gene.[6] A disadvantage and serious risk of using fold change in this setting is that it is biased[7] and may misclassify differentially expressed genes with large differences (B − A) but small ratios (B/A), leading to poor identification of changes at high expression levels. Furthermore, when the denominator is close to zero, the ratio is not stable, and the fold change value can be disproportionately affected by measurement noise.
Alternative definition
[edit]There is an alternative definition of fold change,[citation needed] although this has generally fallen out of use. Here, fold change is defined as the ratio of the difference between final value and the initial value divided by the initial value. For quantities A and B, the fold change is given as (B − A)/A, or equivalently B/A − 1. This formulation has appealing properties such as no change being equal to zero, a 100% increase is equal to 1, and a 100% decrease is equal to −1. However, verbally referring to a doubling as a one-fold change and tripling as a two-fold change is counter-intuitive, and so this formulation is rarely used.
This formulation is sometimes called the relative change.
Fold changes in genomics and bioinformatics
[edit]In the field of genomics (and more generally in bioinformatics), the modern usage is to define fold change in terms of ratios, and not by the alternative definition.[8][9]
However, log-ratios are often used for analysis and visualization of fold changes. The logarithm to base 2 is most commonly used,[8][9] as it is easy to interpret, e.g. a doubling in the original scaling is equal to a log2 fold change of 1, a quadrupling is equal to a log2 fold change of 2 and so on. Conversely, the measure is symmetric when the change decreases by an equivalent amount e.g. a halving is equal to a log2 fold change of −1, a quartering is equal to a log2 fold change of −2 and so on. This leads to more aesthetically pleasing plots, as exponential changes are displayed as linear and so the dynamic range is increased. For example, on a plot axis showing log2 fold changes, an 8-fold increase will be displayed at an axis value of 3 (since 23 = 8). However, there is no mathematical reason to only use logarithm to base 2, and due to many discrepancies in describing the log2 fold changes in gene/protein expression, a new term "loget" has been proposed.[10]
See also
[edit]Notes
[edit]- ^ "Free OED – Oxford English Dictionary".
- ^ "Definition of TWOFOLD". 22 March 2024.
- ^ Cieńska, M.; Labus, K.; Lewańczuk, M.; Koźlecki, T.; Liesiene, J.; Bryjak, J. (2016). "Effective L-Tyrosine Hydroxylation by Native and Immobilized Tyrosinase". PLOS ONE. 11 (10): e0164213. Bibcode:2016PLoSO..1164213C. doi:10.1371/journal.pone.0164213. PMC 5053437. PMID 27711193.
- ^ Cunningham, M. W. Jr.; Williams, J. M.; Amaral, L.; Usry, N.; Wallukat, G.; Dechend, R.; LaMarca, B. (2016). "Agonistic Autoantibodies to the Angiotensin II Type 1 Receptor Enhance Angiotensin II–Induced Renal Vascular Sensitivity and Reduce Renal Function During Pregnancy". Hypertension. 68 (5): 1308–1313. doi:10.1161/HYPERTENSIONAHA.116.07971. PMC 5142826. PMID 27698062.
- ^ Li, B.; Li, Y. Y.; Wu, H. M.; Zhang, F. F.; Li, C. J.; Li, X. X.; Lambers, H.; Li, L. (2015). "Root exudates drive interspecific facilitation by enhancing nodulation and N2 fixation". PNAS. 113 (23): 6496–6501. doi:10.1073/pnas.1523580113. PMC 4988560. PMID 27217575.
- ^ Tusher, Virginia Goss; Tibshirani, Robert; Chu, Gilbert (2001). "Significance analysis of microarrays applied to the ionizing radiation response". Proceedings of the National Academy of Sciences of the United States of America. 98 (18): 5116–5121. Bibcode:2001PNAS...98.5116T. doi:10.1073/pnas.091062498. PMC 33173. PMID 11309499.
- ^ Mariani, T. J.; Budhraja V.; Mecham B. H.; Gu C. C.; Watson M. A.; Sadovsky Y. (2003). "A variable fold change threshold determines significance for expression microarrays". FASEB J. 17 (2): 321–323. doi:10.1096/fj.02-0351fje. PMID 12475896. S2CID 16668234.
- ^ Jump up to: a b Robinson, M. D.; Smyth, G. K. (2008). "Small-sample estimation of negative binomial dispersion, with applications to SAGE data". Biostatistics. 9 (2): 321–332. doi:10.1093/biostatistics/kxm030. PMID 17728317.
- ^ Jump up to: a b Love, M. I.; Huber, W.; Anders, S. (2014). "Moderated estimation of fold change and dispersion for RNA-seq data with DESeq2". Genome Biology. 15 (12): 550. doi:10.1186/s13059-014-0550-8. PMC 4302049. PMID 25516281.
- ^ Pacholewska, Alicja (2017). "'Loget' – a Uniform Differential Expression Unit to Replace 'logFC' and 'log2FC'". Matters. doi:10.19185/matters.201706000011. ISSN 2297-8240.